PENTOSIN PENTOFROST SF COOLANT (1.5LITRE)

by on July 3, 2013

$23.87

(Formerly LIFETIME ANTIFREEZE G12)
Size: 1.5 litres
Colour: Violet/Purple
Environmental friendly silicate free coolant concentrate

Out of stock

Category:

Description

(Formerly LIFETIME ANTIFREEZE G12)
Size: 1.5 litres
Colour: Violet/Purple
Environmental friendly silicate free coolant concentrate

  • A modern formulated coolant concentrate without nitrite, amine and phosphorous containing additives and -in addition- does not contain any silicate. It protects water cooled engines and other devices against overheating, corrosion and freezing by means of excellent heat transfer with low evaporation loss.
  • Best suitable for aluminium motors with the requirement “silicate free” . It shows excellent corrosion protection for all materials used in coolers and auxiliary aggregates, is elastomer friendly and impedes deposit formation in the cooling system due to the additives employed.
  • Easily miscible when blending the final antifreeze solution as recommended by the car manufacturer. Please refer to owner’s manual.
  • Miscible with all other quality brand antifreezes of same specification.
  • Audi (after 06/1996 up to 2005); Spec. TL 744 F
  • Jaguar (1997 on)
  • Land Rover Freelander, Discovery, Defender(1998 on)
  • Porsche Boxster, 911, Cayman & Cayenne (1996 on)
  • Saab (2001 on)
  • Volkswagen (after 06/1996 up to 2005); Spec. TL 744 F

{ 3 comments… read them below or add one }

Valdinei October 23, 2013 at 8:11 am

These installations shloud only be done by professionals, so I can’t tell you specifically how to do it. In my video I didn’t connect my secondary pump, or thermostat to the board, I used a Taco zone controller and connected the ISOLATED END SWITCH on the Taco controller to the R and W terminals on the navien board. Than the thermostat and the pump to the Taco Controller. You may need a special Zone Valve control board (not what I used in the video).

Cintia November 7, 2013 at 8:05 pm

Actually I don’t really care for these units for many renoass. The unit in the video actually had to be replaced shortly after the installation due to numerous problems. Navien paid for the 2nd replacement. I wouldn’t install another unless there were no other options.

Cintia November 11, 2013 at 12:18 am

Yes, the ignition mdluoe when first failing will cause the engine to die when it warms and start back up after it has a chance to cool (not necessarily cold.If the chack engine light is on, it would be a good idea to have the codes scanned to see if there is a misfire present. If there is a misfire and a loss of coolant, you may have a . You can scan the codes your self at home. Here is how to do it along with code desciptions: http://muvibzbbt.com [url=http://gntazac.com]gntazac[/url] [link=http://gvgrgzvb.com]gvgrgzvb[/link]

Previous post:

Next post: